How to measure for blinds
When measuring your window for blinds you need to decide whether you want your blind to fit inside or outside the recess. The measuring technique is the same for Venetians, Verticals, Roman and wooden.
Make sure there is nothing that will obstruct your blind from hanging properly and that you will still be able to open your window easily once the blind is fitted. To find what size of blind you need to order, just follow the simple steps below.
Tip - Always use a steel tape when measuring as cloth tapes can stretch and take all measurements to the nearest millimetre (mm).
1. Firstly measure the width of the recess in 2 places (as shown in the picture), this is to allow for any slight variations or irregularity in the window.
2. Take a note of the smallest of these measurement.
3. Do the same for the drop, again taking the smallest measurement.
5. You do not need to deduct anything from the drop measurements as this will be done for you by our manufacturers.
7. The recess must also be at least 80mm (approx 3ins) deep to allow for the fittings.
Outside Recess:
1. Just measure the exact width and drop you would like the blind to cover (as shown in the picture), make sure you include a minimum overlap on both sides and top & bottom of 45mm (approx 1 3/4ins).
2. Don’t forget to take into account of the position of the operating mechanisms.
All our blinds come with all the fittings you'll need, along with instructions for easy installation.
Once you have your measurements, you can drop into the shop, or choose a design from our website and telephone us for more information and prices.
If you experience any problems while using these instructions do not hesitate to contact us and we will be happy to help you out.